Cisco Router Basic configuration commands

Set a console password to cisco
Router(config)#line con 0
Router(config-line)#login
Router(config-line)#password cisco

Set a telnet password
Router(config)#line vty 0 4
Router(config-line)#login
Router(config-line)#password cisco

Stop console timing out
Router(config)#line con 0
Router(config-line)#exec-timeout 0 0

Set the enable password to cisco
Router(config)#enable password cisco

Set the enable secret password to faraz.
This password overrides the enable password and is encypted within the config file
Router(config)#enable secret faraz

Enable an interface
Router(config-if)#no shutdown

To disable an interface
Router(config-if)#shutdown

Set the clock rate for a router with a DCE cable to 64K
Router(config-if)clock rate 64000

Disable CDP for the whole router
Router(config)#no cdp run

Enable CDP for he whole router
Router(config)#cdp run

Disable CDP on an interface
Router(config-if)#no cdp enable

Static route the remote network is 172.16.1.0, with a mask of 255.255.255.0, the next hop is 172.16.2.1, at a cost of 5 hops
Router(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.1 5